📜  C#-运算符

📅  最后修改于: 2020-12-28 05:02:32             🧑  作者: Mango


运算符是一个符号,告诉编译器执行特定的数学或逻辑操作。 C#具有丰富的内置运算符集,并提供以下类型的运算符-

  • 算术运算符
  • 关系运算符
  • 逻辑运算符
  • 按位运算符
  • 赋值运算符
  • 杂项运算符

本教程逐一说明算术,关系,逻辑,按位,赋值和其他运算符。

算术运算符

下表显示了C#支持的所有算术运算运算符。假设变量A持有10,变量B持有20,则-

显示范例

Operator Description Example
+ Adds two operands A + B = 30
Subtracts second operand from the first A – B = -10
* Multiplies both operands A * B = 200
/ Divides numerator by de-numerator B / A = 2
% Modulus Operator and remainder of after an integer division B % A = 0
++ Increment operator increases integer value by one A++ = 11
Decrement operator decreases integer value by one A– = 9

关系运算符

下表显示了C#支持的所有关系运算符。假设变量A持有10,变量B持有20,则-

显示范例

Operator Description Example
== Checks if the values of two operands are equal or not, if yes then condition becomes true. (A == B) is not true.
!= Checks if the values of two operands are equal or not, if values are not equal then condition becomes true. (A != B) is true.
> Checks if the value of left operand is greater than the value of right operand, if yes then condition becomes true. (A > B) is not true.
< Checks if the value of left operand is less than the value of right operand, if yes then condition becomes true. (A < B) is true.
>= Checks if the value of left operand is greater than or equal to the value of right operand, if yes then condition becomes true. (A >= B) is not true.
<= Checks if the value of left operand is less than or equal to the value of right operand, if yes then condition becomes true. (A <= B) is true.

逻辑运算符

下表显示了C#支持的所有逻辑运算符。假设变量A的布尔值是true,变量B的布尔值是false,则-

显示范例

Operator Description Example
&& Called Logical AND operator. If both the operands are non zero then condition becomes true. (A && B) is false.
|| Called Logical OR Operator. If any of the two operands is non zero then condition becomes true. (A || B) is true.
! Called Logical NOT Operator. Use to reverses the logical state of its operand. If a condition is true then Logical NOT operator will make false. !(A && B) is true.

按位运算符

按位运算符对位进行运算并逐位执行操作。 &,|和^的真值表如下-

p q p & q p | q p ^ q
0 0 0 0 0
0 1 0 1 1
1 1 1 1 0
1 0 0 1 1

假设A = 60;和B = 13;然后以二进制格式如下:

A = 0011 1100

B = 0000 1101

——————-

A&B = 0000 1100

A | B = 0011 1101

A ^ B = 0011 0001

〜A = 1100 0011

下表列出了C#支持的按位运算符。假设变量A保持60,变量B保持13,则-

显示范例

Operator Description Example
& Binary AND Operator copies a bit to the result if it exists in both operands. (A & B) = 12, which is 0000 1100
| Binary OR Operator copies a bit if it exists in either operand. (A | B) = 61, which is 0011 1101
^ Binary XOR Operator copies the bit if it is set in one operand but not both. (A ^ B) = 49, which is 0011 0001
~ Binary Ones Complement Operator is unary and has the effect of ‘flipping’ bits. (~A ) = -61, which is 1100 0011 in 2’s complement due to a signed binary number.
<< Binary Left Shift Operator. The left operands value is moved left by the number of bits specified by the right operand. A << 2 = 240, which is 1111 0000
>> Binary Right Shift Operator. The left operands value is moved right by the number of bits specified by the right operand. A >> 2 = 15, which is 0000 1111

赋值运算符

C#支持以下赋值运算符-

显示范例

Operator Description Example
= Simple assignment operator, Assigns values from right side operands to left side operand C = A + B assigns value of A + B into C
+= Add AND assignment operator, It adds right operand to the left operand and assign the result to left operand C += A is equivalent to C = C + A
-= Subtract AND assignment operator, It subtracts right operand from the left operand and assign the result to left operand C -= A is equivalent to C = C – A
*= Multiply AND assignment operator, It multiplies right operand with the left operand and assign the result to left operand C *= A is equivalent to C = C * A
/= Divide AND assignment operator, It divides left operand with the right operand and assign the result to left operand C /= A is equivalent to C = C / A
%= Modulus AND assignment operator, It takes modulus using two operands and assign the result to left operand C %= A is equivalent to C = C % A
<<= Left shift AND assignment operator C <<= 2 is same as C = C << 2
>>= Right shift AND assignment operator C >>= 2 is same as C = C >> 2
&= Bitwise AND assignment operator C &= 2 is same as C = C & 2
^= bitwise exclusive OR and assignment operator C ^= 2 is same as C = C ^ 2
|= bitwise inclusive OR and assignment operator C |= 2 is same as C = C | 2

杂项运算符

很少有其他重要的运算符,包括sizeof,typeof? :由C#支持。

显示范例

Operator Description Example
sizeof() Returns the size of a data type. sizeof(int), returns 4.
typeof() Returns the type of a class. typeof(StreamReader);
& Returns the address of an variable. &a; returns actual address of the variable.
* Pointer to a variable. *a; creates pointer named ‘a’ to a variable.
? : Conditional Expression If Condition is true ? Then value X : Otherwise value Y
is Determines whether an object is of a certain type. If( Ford is Car) // checks if Ford is an object of the Car class.
as Cast without raising an exception if the cast fails. Object obj = new StringReader(“Hello”);

StringReader r = obj as StringReader;

C#中的运算符优先级

运算符优先级确定表达式中术语的分组。这会影响表达式的评估。某些运算符具有更高的优先级;例如,乘法运算符的优先级高于加法运算符。

例如x = 7 + 3 * 2;在这里,x被赋值为13,而不是20,因为运算符*的优先级比+高,因此对3 * 2进行第一个求值,然后将7加。

在此,优先级最高的运算符出现在表格的顶部,而优先级最低的运算符出现在表格的底部。在表达式中,优先级较高的运算符将首先求值。

显示范例

Category Operator Associativity
Postfix () [] -> . ++ – – Left to right
Unary + – ! ~ ++ – – (type)* & sizeof Right to left
Multiplicative * / % Left to right
Additive + – Left to right
Shift << >> Left to right
Relational < <= > >= Left to right
Equality == != Left to right
Bitwise AND & Left to right
Bitwise XOR ^ Left to right
Bitwise OR | Left to right
Logical AND && Left to right
Logical OR || Left to right
Conditional ?: Right to left
Assignment = += -= *= /= %=>>= <<= &= ^= |= Right to left
Comma , Left to right