给定数字N以及最小和最大范围。分别给定a和b的N个值。任务是在执行如下所述的N次操作后计算偶数/奇数结果的数量。
在每一步中，计算：
yN = aNyN-1 + bN.
解释：
- 步骤1：y 1 = a 1 x + b 1
- 步骤2：y 2 = a 2 y 1 + b 2 => y 2 = a 2 a 1 x + a 2 b 1 + b 2
- 步骤3：y 3 = a 3 y 2 + b 3 => y 3 = a 3 a 2 a 1 x + a 3 a 2 b 1 + a 3 b 2 + b 3
- 步骤n：y n = a n y n-1 + b n
为了获得最终结果，请将y 0的值用作[min，mix]范围内的每个值。为简单起见，我们假设y 0的值为x，并用最终方程中[min，max]范围内的所有可能值替换x以计算结果。
例子：
Input: n = 2, min = 1, max = 4
a = 1, b = 2
a = 3, b = 4
Output: even = 2, odd = 2.
Step1: y = 1x + 2 = x+2
Step2: y = 3(x+2) + 4 = 3x + 10
Putting all values of in range [1, 4],
2 odd values and 2 even values are obtained.
Input: n = 1, min = 4, max = 60
a= 1, b = 2
Output: even = 29, odd = 28天真的方法是将a和b的值存储在数组中，并计算指定范围内每个数字的最终结果。如果结果为偶数，则偶数计数增加。否则，奇数计数将增加。
这里使用的一种有效方法的基本概念是，两个数字的乘积即使两个数字中的任何一个为偶数也为偶数，否则为奇数，并且两个数字的总和仅在两个数字均为偶数时才为偶数。在这里，可以看到在每个步骤中，一个数字乘以x，然后将另一个常数添加到乘积中。任务是检查结果是偶数还是奇数。在计算的最后一步，检查a 1 a 2 a 3 …a n是否为偶数/奇数，a 2 a 3 …a n b 1 + a 3 a 4 …a n b 2 +…+ b n是否为偶/奇。检查a 1 a 2 a 3 …a n是否为偶数/奇数：
如果任何一个i是偶数，则乘积将始终是偶数，否则它将是奇数。检查a 2 a 3 …a n b 1 + a 3 a 4 …a n b 2 +…+ b n是否为偶数/奇数：
下表说明了系数的所有各种可能性：
| a2a3…ai-1b1 + a3a4…ai-1b2 + … + bi-1 | ai | bi | a2a3…aib1 + a3a4…aib2 + … + bi |
|---|---|---|---|
| odd | odd | odd | even |
| odd | odd | even | odd |
| odd | even | odd | odd |
| odd | even | even | even |
| even | odd | odd | odd |
| even | odd | even | even |
| even | even | odd | odd |
| even | even | even | even |
下表说明了y = ax + b的所有各种可能性：
| x | a | b | y |
|---|---|---|---|
| odd | odd | odd | even |
| odd | odd | even | odd |
| odd | even | odd | odd |
| odd | even | even | even |
| even | odd | odd | odd |
| even | odd | even | even |
| even | even | odd | odd |
| even | even | even | even |
不必遍历范围[min，max]中的所有数字，而是将其分为两部分来检查范围中的数字是偶数还是奇数，因为所有偶数输入的结果相同，而所有奇数输入的结果均为同样的结果。因此，请检查一种情况，并将其乘以范围中的偶数和奇数。
执行上述计算，并检查最后一步的x系数。
- 如果是偶数，则aeven为true，否则为false。
- 如果常数为偶数，则beven为true，否则为false。
- x的系数在任意一层中均是偶数。
- 最后一层之后的常数项(如果执行)将通过beven的值以及当前的a和b进行检查。
借助于上面给出的表(第一个)，测试了每一层的常数，并且相应地更新了beven的值。
假设x为偶数，则偶数和奇数的值被初始化。
- 如果x为偶数，则无论a为多少，ax都将始终为偶数。因此，根据常数项的值，结果将是偶数或奇数。
- 如果常数为偶数，则结果为偶数，因此，在给定范围内(max / 2 –(min-1)/ 2)，用奇偶数初始化，而用零初始化奇数。
- 如果常数为奇数，则结果为奇数，因此奇数由给定范围内的偶数初始化(max / 2 –(min-1)/ 2)，偶数由零初始化。
假设x为奇数，则更新偶数和奇数的值。
- 如果a为奇数，则ax为奇数。如果a是偶数，则ax是偶数。
- 如果ax和常数都为奇数，或者ax和常数都为偶数，则结果为偶数，因此在给定范围内，奇数增加(奇数–最小+ 1 –偶数) 。
- 如果ax为偶数且常数为奇数，或ax为奇数且常数为奇数，则结果为奇数，因此在给定范围内(最大–最小+ 1 –偶数) ，奇数增加了奇数。 。
下面是上述方法的实现：
C++
// C++ program to print
// Number of odd/even results for
// every value of x in range [min, end]
// after performing N steps
#include
using namespace std;
// Function that prints the
// number of odd and even results
void count_even_odd(int min, int max, int steps[][2])
{
int a, b, even, odd;
// If constant at layer i is even, beven is true,
// otherwise false. If the coefficient of x at
// layer i is even, aeven is true, otherwise false.
bool beven = true, aeven = false;
int n = 2;
for (int i = 0; i < n; i++) {
a = steps[i][0], b = steps[i][1];
// If any of the coefficients at any layer is found
// to be even, then the product of all the
// coefficients will always be even.
if (!(aeven || a & 1))
aeven = true;
// Checking whether the constant added after all
// layers is even or odd.
if (beven) {
if (b & 1)
beven = false;
}
else if (!(a & 1)) {
if (!(b & 1))
beven = true;
}
else {
if (b & 1)
beven = true;
}
}
// Counting the number of even and odd.
// Assuming input x is even.
if (beven) {
even = (int)max / 2 - (int)(min - 1) / 2;
odd = 0;
}
else {
even = (int)max / 2 - (int)(min - 1) / 2;
odd = 0;
}
// Assuming input x is odd.
if (!(beven ^ aeven))
even += max - min + 1 - (int)max / 2
+ (int)(min - 1) / 2;
else
odd += max - min + 1 - (int)max / 2
+ (int)(min - 1) / 2;
// Displaying the counts.
cout << "even = " << even << ", odd = " << odd << endl;
}
// Driver Code
int main()
{
int min = 1, max = 4;
int steps[][2] = { { 1, 2 },
{ 3, 4 } };
count_even_odd(min, max, steps);
return 0;
} Java
// Java program to print
// Number of odd/even
// results for every value
// of x in range [min, end]
// after performing N steps
import java.io.*;
class GFG
{
// Function that prints
// the number of odd and
// even results
static void count_even_odd(int min,
int max,
int steps[][])
{
int a, b, even, odd;
// If constant at layer i
// is even, beven is true,
// otherwise false. If the
// coefficient of x at layer
// i is even, aeven is true,
// otherwise false.
boolean beven = true,
aeven = false;
int n = 2;
for (int i = 0; i < n; i++)
{
a = steps[i][0];
b = steps[i][1];
// If any of the coefficients
// at any layer is found to be
// even, then the product of
// all the coefficients will
// always be even.
if (!(aeven || (a & 1) > 0))
aeven = true;
// Checking whether the
// constant added after all
// layers is even or odd.
if (beven)
{
if ((b & 1) > 0)
beven = false;
}
else if (!((a & 1) > 0))
{
if (!((b & 1) > 0))
beven = true;
}
else
{
if ((b & 1) > 0)
beven = true;
}
}
// Counting the number
// of even and odd.
// Assuming input x is even.
if (beven)
{
even = (int)max / 2 -
(int)(min - 1) / 2;
odd = 0;
}
else
{
even = (int)max / 2 -
(int)(min - 1) / 2;
odd = 0;
}
// Assuming input x is odd.
if (!(beven ^ aeven))
even += max - min + 1 -
(int)max / 2 +
(int)(min - 1) / 2;
else
odd += max - min + 1 -
(int)max / 2 +
(int)(min - 1) / 2;
// Displaying the counts.
System.out.print("even = " + even +
", odd = " + odd);
}
// Driver Code
public static void main (String[] args)
{
int min = 1, max = 4;
int steps[][] = {{1, 2},
{3, 4}};
count_even_odd(min, max, steps);
}
}
// This code is contributed
// by anuj_67.Python3
# Python3 program to print
# Number of odd/even results
# for every value of x in
# range [min, end] after
# performing N steps
# Function that prints
# the number of odd
# and even results
def count_even_odd(min, max, steps):
# If constant at layer i
# is even, beven is True,
# otherwise False. If
# the coefficient of x at
# layer i is even, aeven
# is True, otherwise False.
beven = True
aeven = False
n = 2
for i in range(0, n) :
a = steps[i][0]
b = steps[i][1]
# If any of the coefficients
# at any layer is found to
# be even, then the product
# of all the coefficients
# will always be even.
if (not(aeven or a & 1)):
aeven = True
# Checking whether the
# constant added after all
# layers is even or odd.
if (beven) :
if (b & 1):
beven = False
elif (not(a & 1)) :
if (not(b & 1)):
beven = True
else :
if (b & 1):
beven = True
# Counting the number
# of even and odd.
# Assuming input x is even.
if (beven):
even = (int(max / 2) -
int((min - 1) / 2))
odd = 0
else :
even = (int(max / 2) -
int((min - 1) / 2))
odd = 0
# Assuming input x is odd.
if (not(beven ^ aeven)):
even += (max - min + 1 -
int(max / 2) + int((min - 1) / 2))
else:
odd += (max - min + 1 -
int(max / 2) + int((min - 1) / 2))
# Displaying the counts.
print("even = " , even ,
", odd = " , odd, sep = "")
# Driver Code
min = 1
max = 4
steps = [[1, 2],[3, 4]]
count_even_odd(min, max, steps)
# This code is contributed
# by SmithaC#
// C# program to print
// Number of odd/even
// results for every value
// of x in range [min, end]
// after performing N steps
using System;
class GFG
{
// Function that prints
// the number of odd and
// even results
static void count_even_odd(int min,
int max,
int [,]steps)
{
int a, b, even, odd;
// If constant at layer i
// is even, beven is true,
// otherwise false. If the
// coefficient of x at layer
// i is even, aeven is true,
// otherwise false.
bool beven = true,
aeven = false;
int n = 2;
for (int i = 0; i < n; i++)
{
a = steps[i, 0];
b = steps[i, 1];
// If any of the coefficients
// at any layer is found
// to be even, then the
// product of all the
// coefficients will always
// be even.
if (!(aeven || (a & 1) > 0))
aeven = true;
// Checking whether the
// constant added after all
// layers is even or odd.
if (beven)
{
if ((b & 1) > 0)
beven = false;
}
else if (!((a & 1) > 0))
{
if (!((b & 1) > 0))
beven = true;
}
else
{
if ((b & 1) > 0)
beven = true;
}
}
// Counting the number
// of even and odd.
// Assuming input
// x is even.
if (beven)
{
even = (int)max / 2 -
(int)(min - 1) / 2;
odd = 0;
}
else
{
even = (int)max / 2 -
(int)(min - 1) / 2;
odd = 0;
}
// Assuming input
// x is odd.
if (!(beven ^ aeven))
even += max - min + 1 -
(int)max / 2 +
(int)(min - 1) / 2;
else
odd += max - min + 1 -
(int)max / 2 +
(int)(min - 1) / 2;
// Displaying the counts.
Console.Write("even = " + even +
", odd = " + odd);
}
// Driver Code
public static void Main ()
{
int min = 1, max = 4;
int [,]steps = {{1, 2},
{3, 4}};
count_even_odd(min, max, steps);
}
}
// This code is contributed
// by anuj_67.PHP
Javascript
输出：
even = 2, odd = 2如果您希望与行业专家一起参加现场课程，请参阅《 Geeks现场课程》和《 Geeks现场课程美国》。