任何一对不同元素之间具有最大 GCD 的最长子序列

给定一个由N 个正整数组成的数组arr[] ，任务是从给定的数组中找到子序列的最大长度，使得该子序列的任何两个不同整数的 GCD最大。

例子：

Input: arr[] = {5, 14, 15, 20, 1}
Output: 3
Explanation: Subsequence with maximum GCD of any pair of distinct integers is {5, 15, 20}.
The GCD between any pair of distinct elements in the above sequence is 5 and it is the maximum GCD in the array.

Input: arr[] = {1, 2, 8, 5, 6}
Output: 3
Explanation:< Subsequence with maximum GCD of any pair of distinct integers is {2, 8, 6}.
The GCD between any two distinct number in the above sequence is 2 and it is the maximum GCD in the array.

朴素方法：最简单的方法是使用递归并递归生成给定数组的所有可能子序列，并在这些子序列中找到最大长度。以下是步骤：

• 创建一个函数以使用 Sieve Of Eratosthenes 的思想在数组中找到具有最大 GCD 的对(比如maxGCD )。
• 创建另一个函数来计算子序列数组的最大长度，其中任意两个不同元素之间的 GCD 最大：
  • 创建一个辅助数组arr1[]以按排序顺序存储数组元素。
  • 将两个变量初始化为[0, 0]并递归生成所有子序列并返回具有 GCD 的子序列的最大长度为maxGCD 。
• 经过以上步骤，打印出上述递归调用返回的最大长度。

 下面是上述方法的实现：

C++

// C++ program for the above approach
#include
using namespace std;
 
// Function to find GCD of pair with
// maximum GCD
int findMaxGCD(int arr[], int N)
{
     
    // Stores maximum element of arr[]
    int high = 0;
     
    // Find the maximum element
    for(int i = 0; i < N; i++)
    {
        high = max(high, arr[i]);
    }
 
    // Maintain a count array
    int count[high + 1] = {0};
     
    // Store the frequency of arr[]
    for(int i = 0; i < N; i++)
    {
        count[arr[i]] += 1;
    }
 
    // Stores the multiples of a number
    int counter = 0;
 
    // Iterate over the  range [MAX, 1]
    for(int i = high; i > 0; i--)
    {
        int j = i;
 
        // Iterate from current potential
        // GCD till it is less than MAX
        while (j <= high)
        {
             
            // A multiple found
            if (count[j] > 0)
                counter += count[j];
 
            // Increment potential GCD by
            // itself io check i, 2i, 3i...
            j += i;
 
            // If 2 multiples found max
            // GCD found
            if (counter == 2)
                return i;
        }
        counter = 0;
    }
}
     
// Function to find longest subsequence
// such that GCD of any two distinct
// integers is maximum
int maxlen(int i, int j, int arr[],
           int arr1[], int N, int maxgcd)
{
    int a = 1;
 
    // Base Cases
    if (i >= N or j >= N)
        return 0;
 
    // Compare current GCD to the
    // maximum GCD
    if (__gcd(arr[i], arr1[j]) == maxgcd &&
              arr[i] != arr1[j])
    {
         
        // If true increment and
        // move the pointer
        a = max(a, 1 + maxlen(i, j + 1,
                              arr, arr1,
                              N, maxgcd));
        return a;
    }
     
    // Return max of either subsequences
    return max(maxlen(i + 1, j, arr,
                      arr1, N, maxgcd),
               maxlen(i, j + 1, arr,
                      arr1, N, maxgcd));
}
 
// Driver Code
int main()
{
    int arr[] = { 1, 2, 8, 5, 6 };
    int arr1[] = { 1, 2, 8, 5, 6 };
     
    // Sorted array
    int n = sizeof(arr) / sizeof(arr[0]);
     
    sort(arr, arr + n);
    sort(arr1, arr1 + n);
     
    // Function call to calculate GCD of
    // pair with maximum GCD
    int maxgcd = findMaxGCD(arr, n);
     
    // Print the result
    cout << maxlen(0, 0, arr,
                   arr1, n, maxgcd) + 1;
}
 
// This code is contributed by ipg2016107

Java

// Java program for the
// above approach
import java.util.*;
 
class GFG{
     
// Recursive function to
// return gcd of a and b 
static int __gcd(int a,
                 int b) 
{ 
  return b == 0 ?
         a :__gcd(b, a % b);    
}
   
// Function to find GCD of
// pair with maximum GCD
static int findMaxGCD(int arr[],
                      int N)
{   
  // Stores maximum element
  // of arr[]
  int high = 0;
 
  // Find the maximum element
  for(int i = 0; i < N; i++)
  {
    high = Math.max(high,
                    arr[i]);
  }
 
  // Maintain a count array
  int []count = new int[high + 1];
 
  // Store the frequency of arr[]
  for(int i = 0; i < N; i++)
  {
    count[arr[i]] += 1;
  }
 
  // Stores the multiples of
  // a number
  int counter = 0;
 
  // Iterate over the  range
  // [MAX, 1]
  for(int i = high; i > 0; i--)
  {
    int j = i;
 
    // Iterate from current potential
    // GCD till it is less than MAX
    while (j <= high)
    {
      // A multiple found
      if (count[j] > 0)
        counter += count[j];
 
      // Increment potential GCD by
      // itself io check i, 2i, 3i...
      j += i;
 
      // If 2 multiples found max
      // GCD found
      if (counter == 2)
        return i;
    }
    counter = 0;
  }
  return 0;
}
 
// Function to find longest
// subsequence such that GCD
// of any two distinct integers
// is maximum
static int maxlen(int i, int j,
                  int arr[],
                  int arr1[],
                  int N, int maxgcd)
{
  int a = 1;
 
  // Base Cases
  if (i >= N || j >= N)
    return 0;
 
  // Compare current GCD to
  // the maximum GCD
  if (__gcd(arr[i], arr1[j]) == maxgcd &&
      arr[i] != arr1[j])
  {
    // If true increment and
    // move the pointer
    a = Math.max(a, 1 + maxlen(i, j + 1,
                               arr, arr1,
                               N, maxgcd));
    return a;
  }
 
  // Return max of either subsequences
  return Math.max(maxlen(i + 1, j, arr,
                         arr1, N, maxgcd),
                  maxlen(i, j + 1, arr,
                         arr1, N, maxgcd));
}
 
// Driver Code
public static void main(String[] args)
{
  int arr[] = {1, 2, 8, 5, 6};
  int arr1[] = {1, 2, 8, 5, 6};
 
  // Sorted array
  int n = arr.length;
 
  Arrays.sort(arr);
 
  // Function call to calculate GCD of
  // pair with maximum GCD
  int maxgcd = findMaxGCD(arr, n);
 
  // Print the result
  System.out.print(maxlen(0, 0, arr,
                          arr1, n, maxgcd));
}
}
 
// This code is contributed by gauravrajput1

Python3

# Python3 program for the above approach
import math
 
# Function to find GCD of pair with
# maximum GCD
def findMaxGCD(arr, N):
     
    # Stores maximum element of arr[]
    high = 0
     
    # Find the maximum element
    for i in range(0, N):
        high = max(high, arr[i])
 
    # Maintain a count array
    count = [0] * (high + 1)
     
    # Store the frequency of arr[]
    for i in range(0, N):
        count[arr[i]] += 1
 
    # Stores the multiples of a number
    counter = 0
 
    # Iterate over the  range [MAX, 1]
    for i in range(high, 0, -1):
        j = i
 
        # Iterate from current potential
        # GCD till it is less than MAX
        while (j <= high):
 
            # A multiple found
            if (count[j] > 0):
                counter += count[j]
 
            # Increment potential GCD by
            # itself io check i, 2i, 3i...
            j += i
 
            # If 2 multiples found max
            # GCD found
            if (counter == 2):
                return i
 
        counter = 0
 
# Function to find longest subsequence
# such that GCD of any two distinct
# integers is maximum
def maxlen(i, j):
    a = 0
 
    # Base Cases
    if i >= N or j >= N:
        return 0
 
    # Compare current GCD to the
    # maximum GCD
    if math.gcd(arr[i], arr1[j]) == maxgcd and arr[i] != arr1[j]:
 
        # If true increment and
        # move the pointer
        a = max(a, 1 + maxlen(i, j + 1))
        return a
 
    # Return max of either subsequences
    return max(maxlen(i + 1, j), maxlen(i, j + 1))
 
 
# Drivers Code
arr = [1, 2, 8, 5, 6]
 
# Sorted array
arr1 = sorted(arr)
 
# Length of the array
N = len(arr)
 
# Function call to calculate GCD of
# pair with maximum GCD
maxgcd = findMaxGCD(arr, N)
 
# Print the result
print(maxlen(0, 0))

C#

// C# program for the
// above approach
using System;
 
class GFG{
     
// Recursive function to
// return gcd of a and b 
static int __gcd(int a, int b) 
{
  return b == 0 ?
         a :__gcd(b, a % b);    
}
   
// Function to find GCD of
// pair with maximum GCD
static int findMaxGCD(int []arr,
                      int N)
{   
   
  // Stores maximum element
  // of []arr
  int high = 0;
 
  // Find the maximum element
  for(int i = 0; i < N; i++)
  {
    high = Math.Max(high,
                    arr[i]);
  }
 
  // Maintain a count array
  int []count = new int[high + 1];
 
  // Store the frequency of []arr
  for(int i = 0; i < N; i++)
  {
    count[arr[i]] += 1;
  }
 
  // Stores the multiples of
  // a number
  int counter = 0;
 
  // Iterate over the  range
  // [MAX, 1]
  for(int i = high; i > 0; i--)
  {
    int j = i;
 
    // Iterate from current potential
    // GCD till it is less than MAX
    while (j <= high)
    {
       
      // A multiple found
      if (count[j] > 0)
        counter += count[j];
 
      // Increment potential GCD by
      // itself io check i, 2i, 3i...
      j += i;
 
      // If 2 multiples found max
      // GCD found
      if (counter == 2)
        return i;
    }
    counter = 0;
  }
  return 0;
}
 
// Function to find longest
// subsequence such that GCD
// of any two distinct integers
// is maximum
static int maxlen(int i, int j,
                  int []arr,
                  int []arr1,
                  int N, int maxgcd)
{
  int a = 1;
 
  // Base Cases
  if (i >= N || j >= N)
    return 0;
 
  // Compare current GCD to
  // the maximum GCD
  if (__gcd(arr[i], arr1[j]) == maxgcd &&
                      arr[i] != arr1[j])
  {
     
    // If true increment and
    // move the pointer
    a = Math.Max(a, 1 + maxlen(i, j + 1,
                               arr, arr1,
                               N, maxgcd));
    return a;
  }
 
  // Return max of either subsequences
  return Math.Max(maxlen(i + 1, j, arr,
                         arr1, N, maxgcd),
                  maxlen(i, j + 1, arr,
                         arr1, N, maxgcd));
}
 
// Driver Code
public static void Main(String[] args)
{
  int []arr = { 1, 2, 8, 5, 6 };
  int []arr1 = { 1, 2, 8, 5, 6 };
 
  // Sorted array
  int n = arr.Length;
 
  Array.Sort(arr);
 
  // Function call to calculate GCD of
  // pair with maximum GCD
  int maxgcd = findMaxGCD(arr, n);
 
  // Print the result
  Console.Write(maxlen(0, 0, arr,
                       arr1, n, maxgcd));
}
}
 
// This code is contributed by Princi Singh

Javascript

// javascript program for the
// above approach
 
    // Recursive function to
    // return gcd of a and b
    function __gcd(a , b) {
        return b == 0 ? a : __gcd(b, a % b);
    }
 
    // Function to find GCD of
    // pair with maximum GCD
    function findMaxGCD(arr, N)
    {
     
        // Stores maximum element
        // of arr
        var high = 0;
 
        // Find the maximum element
        for (i = 0; i < N; i++)
        {
            high = Math.max(high, arr[i]);
        }
 
        // Maintain a count array
        var count = Array(high + 1).fill(0);
 
        // Store the frequency of arr
        for (i = 0; i < N; i++)
        {
            count[arr[i]] += 1;
        }
 
        // Stores the multiples of
        // a number
        var counter = 0;
 
        // Iterate over the range
        // [MAX, 1]
        for (i = high; i > 0; i--)
        {
            var j = i;
 
            // Iterate from current potential
            // GCD till it is less than MAX
            while (j <= high)
            {
             
                // A multiple found
                if (count[j] > 0)
                    counter += count[j];
 
                // Increment potential GCD by
                // itself io check i, 2i, 3i...
                j += i;
 
                // If 2 multiples found max
                // GCD found
                if (counter == 2)
                    return i;
            }
            counter = 0;
        }
        return 0;
    }
 
    // Function to find longest
    // subsequence such that GCD
    // of any two distinct integers
    // is maximum
    function maxlen(i , j , arr , arr1 , N , maxgcd)
    {
        var a = 1;
 
        // Base Cases
        if (i >= N || j >= N)
            return 0;
 
        // Compare current GCD to
        // the maximum GCD
        if (__gcd(arr[i], arr1[j]) == maxgcd && arr[i] != arr1[j])
        {
         
            // If true increment and
            // move the pointer
            a = Math.max(a, 1 + maxlen(i, j + 1, arr, arr1, N, maxgcd));
            return a;
        }
 
        // Return max of either subsequences
        return Math.max(maxlen(i + 1, j, arr, arr1, N, maxgcd), maxlen(i, j + 1, arr, arr1, N, maxgcd));
    }
 
    // Driver Code
     
        var arr = [ 1, 2, 8, 5, 6 ];
        var arr1 = [ 1, 2, 8, 5, 6 ];
 
        // Sorted array
        var n = arr.length;
 
        arr.sort();
 
        // Function call to calculate GCD of
        // pair with maximum GCD
        var maxgcd = findMaxGCD(arr, n);
 
        // Prvar the result
        document.write(maxlen(0, 0, arr, arr1, n, maxgcd));
 
// This code is contributed by gauravrajput1.

输出：

3

时间复杂度： O(2 ^N )
辅助空间： O(N)

高效的方法：为了优化上述方法，其思想是使用动态规划，因为上述解决方案中有许多重叠的子问题需要一次又一次地解决。因此，可以通过使用 Memoization 或 Tabulation 来避免对相同子问题的重新计算。使用字典记住两个索引之间子序列的最大长度，并在下一次递归调用中使用这些值。以下是步骤：

1. 执行上述所有步骤。
2. 使用字典dp存储两个索引之间的子序列的最大长度。
3. 在进行递归调用时，只需检查表dp[][]是否先前计算过该值。如果发现为真，则使用此值。否则，调用其他索引范围的函数。
4. 打印经过上述步骤计算出的子序列的最大长度。

 下面是上述方法的实现：

C++

// C++ program for the above approach
#include
using namespace std;
 
map, int>dp;
int maxgcd;
vectorarr, arr1;
int N;
 
// Function to find GCD of pair with
// maximum GCD
int findMaxGCD(vectorarr, int  N)
{
     
    // Stores maximum element of arr[]
    int high = 0;
     
    // Find the maximum element
    for(int i = 0; i < N; i++)
        high = max(high, arr[i]);
         
    // Maintain a count array
    int count[high + 1] = {0};
 
    // Store the frequency of arr[]
    for(int i = 0; i < N; i++)
        count[arr[i]] += 1;
         
    // Stores the multiples of a number
    int counter = 0;
     
    // Iterate over the  range [MAX, 1]
    for(int i = high; i > 0; i--)
    {
        int j = i;
         
        // Iterate from current potential
        // GCD till it is less than MAX
        while (j <= high)
        {
             
            // A multiple found
            if (count[j] > 0)
                counter += count[j];
                 
            // Increment potential GCD by
            // itself io check i, 2i, 3i...
            j += i;
             
            // If 2 multiples found max
            // GCD found
            if (counter == 2)
                return i;
        }
        counter = 0;
    }
    return 1;
}
     
// Function to find longest subsequence
// such that GCD of any two distinct
// integers is maximum
int maxlen(int i, int j)
{
    int  a = 0;
 
    // Create the key
    // Base Case
    if (i >= N or j >= N)
        return 0;
         
    // Check if the current state is
    // already calculated
    if (dp[{i, j}])
        return dp[{i, j}];
       
    // Compare current GCD to the
    // maximum GCD
    if (__gcd(arr[i], arr1[j]) ==
        maxgcd && arr[i] != arr1[j])
    {
         
        // If true increment and
        // move the pointer
        dp[{i, j}] = 1 + maxlen(i, j + 1);
        return dp[{i, j}];
    }
     
    // Return max of either subsequences
    return (max(maxlen(i + 1, j),
                maxlen(i, j + 1)));
}
   
// Driver Code
int main()
{
    arr = { 1, 2, 8, 5, 6 };
    arr1 = arr;
     
    // Sorted array
    sort(arr1.begin(), arr1.end());
     
    // Length of the array
    N = arr.size();
     
    // Function Call
    maxgcd = findMaxGCD(arr, N);
     
    // Print the result
    cout << (maxlen(0, 0));
}
 
// This code is contributed by Stream_Cipher

Java

// Java program for the above approach
import java.util.*;
import java.awt.Point;
public class Main
{
  static HashMap dp = new HashMap<>();
  static int maxgcd, N;
  static Vector arr;
  static Vector arr1;
 
  static int __gcd(int a, int b)
  {
    if (b == 0)
      return a;
 
    return __gcd(b, a % b);
  }
 
  // Function to find GCD of pair with
  // maximum GCD
  static int findMaxGCD(Vector arr, int N)
  {
 
    // Stores maximum element of arr[]
    int high = 0;
 
    // Find the maximum element
    for(int i = 0; i < N; i++)
      high = Math.max(high, arr.get(i));
 
    // Maintain a count array
    int[] count = new int[high + 1];
 
    // Store the frequency of arr[]
    for(int i = 0; i < N; i++)
      count[arr.get(i)] += 1;
 
    // Stores the multiples of a number
    int counter = 0;
 
    // Iterate over the  range [MAX, 1]
    for(int i = high; i > 0; i--)
    {
      int j = i;
 
      // Iterate from current potential
      // GCD till it is less than MAX
      while (j <= high)
      {
 
        // A multiple found
        if (count[j] > 0)
          counter += count[j];
 
        // Increment potential GCD by
        // itself io check i, 2i, 3i...
        j += i;
 
        // If 2 multiples found max
        // GCD found
        if (counter == 2)
          return i;
      }
      counter = 0;
    }
    return 1;
  }
 
  // Function to find longest subsequence
  // such that GCD of any two distinct
  // integers is maximum
  static int maxlen(int i, int j)
  {
 
    // Create the key
    // Base Case
    if (i >= N || j >= N)
      return 0;
 
    // Check if the current state is
    // already calculated
    if (dp.containsKey(new Point(i, j)))
      return dp.get(new Point(i, j));
 
    // Compare current GCD to the
    // maximum GCD
    if (__gcd(arr.get(i), arr1.get(j)) ==
        maxgcd && arr.get(i) != arr1.get(j))
    {
 
      // If true increment and
      // move the pointer
      dp.put(new Point(i, j), 1 + maxlen(i, j + 1));
      return dp.get(new Point(i, j));
    }
 
    // Return max of either subsequences
    return (Math.max(maxlen(i + 1, j), maxlen(i, j + 1)));
  }
 
  public static void main(String[] args) {
    arr = new Vector();
    arr.add(1);
    arr.add(2);
    arr.add(8);
    arr.add(5);
    arr.add(6);
    arr1 = arr;
 
    // Sorted array
    Collections.sort(arr1);
 
    // Length of the array
    N = arr.size();
 
    // Function Call
    maxgcd = findMaxGCD(arr, N);
 
    // Print the result
    System.out.println(maxlen(0, 0) + 1);
  }
}
 
// This code is contributed by divyeshrabadiya07.

蟒蛇3

# Python3 program for the above approach
import math
 
# Function to find GCD of pair with
# maximum GCD
def findMaxGCD(arr, N):
     
    # Stores maximum element of arr[]
    high = 0
     
    # Find the maximum element
    for i in range(0, N):
        high = max(high, arr[i])
 
    # Maintain a count array
    count = [0] * (high + 1)
     
    # Store the frequency of arr[]
    for i in range(0, N):
        count[arr[i]] += 1
 
    # Stores the multiples of a number
    counter = 0
 
    # Iterate over the  range [MAX, 1]
    for i in range(high, 0, -1):
        j = i
 
        # Iterate from current potential
        # GCD till it is less than MAX
        while (j <= high):
 
            # A multiple found
            if (count[j] > 0):
                counter += count[j]
 
            # Increment potential GCD by
            # itself io check i, 2i, 3i...
            j += i
 
            # If 2 multiples found max
            # GCD found
            if (counter == 2):
                return i
 
        counter = 0
 
# Function to find longest subsequence
# such that GCD of any two distinct
# integers is maximum
def maxlen(i, j):
   
    a = 0
     
    # Create the key
    key = (i, j)
 
    # Base Case
    if i >= N or j >= N:
        return 0
     
    # Check if the current state is
    # already calculated
    if key in dp:
        return dp[key]
       
    # Comapare current GCD to the
    # maximum GCD
    if math.gcd(arr[i], arr1[j]) == maxgcd and arr[i] != arr1[j]:
 
        # If true increment and
        # move the pointer
        dp[key] = 1 + maxlen(i, j + 1)
 
        return dp[key]
 
    # Return max of either subsequences
    return max(maxlen(i + 1, j), maxlen(i, j + 1))
 
 
# Drivers code
arr = [1, 2, 8, 5, 6]
 
# Empty dictionary
dp = dict()
 
# Sorted array
arr1 = sorted(arr)
 
# Length of the array
N = len(arr)
 
# Function Call
maxgcd = findMaxGCD(arr, N)
 
# Print the result
print(maxlen(0, 0))

C＃

// C# program for the above approach
using System;
using System.Collections.Generic;
 
class GFG{
     
static Dictionary, int> dp = new Dictionary, int>();
static int maxgcd, N;
static List arr;
static List arr1;
 
static int __gcd(int a, int b)
{
    if (b == 0)
        return a;
         
    return __gcd(b, a % b);
}
 
// Function to find GCD of pair with
// maximum GCD
static int findMaxGCD(List arr, int N)
{
     
    // Stores maximum element of arr[]
    int high = 0;
      
    // Find the maximum element
    for(int i = 0; i < N; i++)
        high = Math.Max(high, arr[i]);
          
    // Maintain a count array
    int[] count = new int[high + 1];
  
    // Store the frequency of arr[]
    for(int i = 0; i < N; i++)
        count[arr[i]] += 1;
          
    // Stores the multiples of a number
    int counter = 0;
      
    // Iterate over the  range [MAX, 1]
    for(int i = high; i > 0; i--)
    {
        int j = i;
          
        // Iterate from current potential
        // GCD till it is less than MAX
        while (j <= high)
        {
             
            // A multiple found
            if (count[j] > 0)
                counter += count[j];
                  
            // Increment potential GCD by
            // itself io check i, 2i, 3i...
            j += i;
              
            // If 2 multiples found max
            // GCD found
            if (counter == 2)
                return i;
        }
        counter = 0;
    }
    return 1;
}
      
// Function to find longest subsequence
// such that GCD of any two distinct
// integers is maximum
static int maxlen(int i, int j)
{
     
    // Create the key
    // Base Case
    if (i >= N || j >= N)
        return 0;
          
    // Check if the current state is
    // already calculated
    if (dp.ContainsKey(new Tuple(i, j)))
        return dp[new Tuple(i, j)];
        
    // Compare current GCD to the
    // maximum GCD
    if (__gcd(arr[i], arr1[j]) ==
             maxgcd && arr[i] != arr1[j])
    {
         
        // If true increment and
        // move the pointer
        dp[new Tuple(i, j)] = 1 + maxlen(
                                     i, j + 1);
        return dp[new Tuple(i, j)];
    }
      
    // Return max of either subsequences
    return (Math.Max(maxlen(i + 1, j),
                  maxlen(i, j + 1)));
}
 
// Driver code
static void Main()
{
    arr = new List(new int[]{ 1, 2, 8, 5, 6 });
    arr1 = arr;
      
    // Sorted array
    arr1.Sort();
      
    // Length of the array
    N = arr.Count;
      
    // Function Call
    maxgcd = findMaxGCD(arr, N);
      
    // Print the result
    Console.Write(maxlen(0, 0) + 1);
}
}
 
// This code is contributed by divyesh072019

Javascript

 
// JavaScript program for the above approach
 
var dp = new Map();
var maxgcd;
var arr = [], arr1 = [];
var N;
 
// Function to find GCD of pair with
// maximum GCD
function findMaxGCD(arr, N)
{
     
    // Stores maximum element of arr[]
    var high = 0;
     
    // Find the maximum element
    for(var i = 0; i < N; i++)
        high = Math.max(high, arr[i]);
         
    // Maintain a count array
    var count = Array(high+1).fill(0);
 
    // Store the frequency of arr[]
    for(var i = 0; i < N; i++)
        count[arr[i]] += 1;
         
    // Stores the multiples of a number
    var counter = 0;
     
    // Iterate over the  range [MAX, 1]
    for(var i = high; i > 0; i--)
    {
        var j = i;
         
        // Iterate from current potential
        // GCD till it is less than MAX
        while (j <= high)
        {
             
            // A multiple found
            if (count[j] > 0)
                counter += count[j];
                 
            // Increment potential GCD by
            // itself io check i, 2i, 3i...
            j += i;
             
            // If 2 multiples found max
            // GCD found
            if (counter == 2)
                return i;
        }
        counter = 0;
    }
    return 1;
}
 
function __gcd(a, b)
{
    if (b == 0)
        return a;
         
    return __gcd(b, a % b);
}
     
// Function to find longest subsequence
// such that GCD of any two distinct
// integers is maximum
function maxlen(i, j)
{
    var a = 0;
 
    // Create the key
    // Base Case
    if (i >= N ||  j >= N)
        return 0;
         
    // Check if the current state is
    // already calculated
    if (dp.has([i, j].toString()))
        return dp.get([i, j].toString());
       
    // Compare current GCD to the
    // maximum GCD
    if (__gcd(arr[i], arr1[j]) ==
        maxgcd && arr[i] != arr1[j])
    {
         
        // If true increment and
        // move the pointer
        dp.set([i, j].toString(), 1 + maxlen(i, j + 1));
        return dp.get([i, j].toString());
    }
     
    // Return max of either subsequences
    return (Math.max(maxlen(i + 1, j),
                maxlen(i, j + 1)));
}
   
// Driver Code
arr = [1, 2, 8, 5, 6];
arr1 = JSON.parse(JSON.stringify(arr));
 
// Sorted array
arr1.sort((a,b)=>a-b);
 
// Length of the array
N = arr.length;
 
// Function Call
maxgcd = findMaxGCD(arr, N);
 
// Print the result
document.write(maxlen(0, 0));
 
 

输出：

3

时间复杂度： O(N ² )
辅助空间： O(N)

如果您希望与专家一起参加现场课程，请参阅DSA 现场工作专业课程和学生竞争性编程现场课程。