📅 最后修改于: 2020-11-08 07:39:22 🧑 作者: Mango
NumPy具有许多有用的统计函数，用于从数组中的给定元素中查找最小值，最大值，百分位数标准偏差和方差等。功能解释如下-
这些函数沿指定轴从给定数组中的元素返回最小值和最大值。
import numpy as np
a = np.array([[3,7,5],[8,4,3],[2,4,9]])
print 'Our array is:'
print a
print '\n'
print 'Applying amin() function:'
print np.amin(a,1)
print '\n'
print 'Applying amin() function again:'
print np.amin(a,0)
print '\n'
print 'Applying amax() function:'
print np.amax(a)
print '\n'
print 'Applying amax() function again:'
print np.amax(a, axis = 0)
它将产生以下输出-
Our array is:
[[3 7 5]
[8 4 3]
[2 4 9]]
Applying amin() function:
[3 3 2]
Applying amin() function again:
[2 4 3]
Applying amax() function:
9
Applying amax() function again:
[8 7 9]
numpy.ptp()函数返回沿轴的值的范围(最大-最小)。
import numpy as np
a = np.array([[3,7,5],[8,4,3],[2,4,9]])
print 'Our array is:'
print a
print '\n'
print 'Applying ptp() function:'
print np.ptp(a)
print '\n'
print 'Applying ptp() function along axis 1:'
print np.ptp(a, axis = 1)
print '\n'
print 'Applying ptp() function along axis 0:'
print np.ptp(a, axis = 0)
它将产生以下输出-
Our array is:
[[3 7 5]
[8 4 3]
[2 4 9]]
Applying ptp() function:
7
Applying ptp() function along axis 1:
[4 5 7]
Applying ptp() function along axis 0:
[6 3 6]
百分位数(或百分位数)是统计中使用的一种度量，它指示一组观察值中给定的观察值百分比下降到的值。函数numpy.percentile()采用以下参数。
numpy.percentile(a, q, axis)
哪里，
| Sr.No. | Argument & Description |
|---|---|
| 1 |
a Input array |
| 2 |
q The percentile to compute must be between 0-100 |
| 3 |
axis The axis along which the percentile is to be calculated |
import numpy as np
a = np.array([[30,40,70],[80,20,10],[50,90,60]])
print 'Our array is:'
print a
print '\n'
print 'Applying percentile() function:'
print np.percentile(a,50)
print '\n'
print 'Applying percentile() function along axis 1:'
print np.percentile(a,50, axis = 1)
print '\n'
print 'Applying percentile() function along axis 0:'
print np.percentile(a,50, axis = 0)
它将产生以下输出-
Our array is:
[[30 40 70]
[80 20 10]
[50 90 60]]
Applying percentile() function:
50.0
Applying percentile() function along axis 1:
[ 40. 20. 60.]
Applying percentile() function along axis 0:
[ 50. 40. 60.]
中位数定义为将数据样本的上半部分与下半部分分开的值。 numpy.median()函数的用法如下例所示。
import numpy as np
a = np.array([[30,65,70],[80,95,10],[50,90,60]])
print 'Our array is:'
print a
print '\n'
print 'Applying median() function:'
print np.median(a)
print '\n'
print 'Applying median() function along axis 0:'
print np.median(a, axis = 0)
print '\n'
print 'Applying median() function along axis 1:'
print np.median(a, axis = 1)
它将产生以下输出-
Our array is:
[[30 65 70]
[80 95 10]
[50 90 60]]
Applying median() function:
65.0
Applying median() function along axis 0:
[ 50. 90. 60.]
Applying median() function along axis 1:
[ 65. 80. 60.]
算术平均值是沿轴的元素之和除以元素数。 numpy.mean()函数返回数组中元素的算术平均值。如果提到了轴，则沿轴进行计算。
import numpy as np
a = np.array([[1,2,3],[3,4,5],[4,5,6]])
print 'Our array is:'
print a
print '\n'
print 'Applying mean() function:'
print np.mean(a)
print '\n'
print 'Applying mean() function along axis 0:'
print np.mean(a, axis = 0)
print '\n'
print 'Applying mean() function along axis 1:'
print np.mean(a, axis = 1)
它将产生以下输出-
Our array is:
[[1 2 3]
[3 4 5]
[4 5 6]]
Applying mean() function:
3.66666666667
Applying mean() function along axis 0:
[ 2.66666667 3.66666667 4.66666667]
Applying mean() function along axis 1:
[ 2. 4. 5.]
加权平均值是每个分量乘以反映其重要性的因子得出的平均值。 numpy.average()函数根据另一个数组中给定的元素各自的权重来计算数组中元素的加权平均值。该函数可以具有轴参数。如果未指定轴，则将数组展平。
考虑到数组[1,2,3,4]和相应的权重[4,3,2,1]，可以通过将相应元素的乘积相加并将总和除以权重之和来计算加权平均值。
加权平均值=(1 * 4 + 2 * 3 + 3 * 2 + 4 * 1)/(4 + 3 + 2 + 1)
import numpy as np
a = np.array([1,2,3,4])
print 'Our array is:'
print a
print '\n'
print 'Applying average() function:'
print np.average(a)
print '\n'
# this is same as mean when weight is not specified
wts = np.array([4,3,2,1])
print 'Applying average() function again:'
print np.average(a,weights = wts)
print '\n'
# Returns the sum of weights, if the returned parameter is set to True.
print 'Sum of weights'
print np.average([1,2,3, 4],weights = [4,3,2,1], returned = True)
它将产生以下输出-
Our array is:
[1 2 3 4]
Applying average() function:
2.5
Applying average() function again:
2.0
Sum of weights
(2.0, 10.0)
在多维数组中，可以指定用于计算的轴。
import numpy as np
a = np.arange(6).reshape(3,2)
print 'Our array is:'
print a
print '\n'
print 'Modified array:'
wt = np.array([3,5])
print np.average(a, axis = 1, weights = wt)
print '\n'
print 'Modified array:'
print np.average(a, axis = 1, weights = wt, returned = True)
它将产生以下输出-
Our array is:
[[0 1]
[2 3]
[4 5]]
Modified array:
[ 0.625 2.625 4.625]
Modified array:
(array([ 0.625, 2.625, 4.625]), array([ 8., 8., 8.]))
标准偏差是与均值平方差的平均值的平方根。标准差的公式如下-
std = sqrt(mean(abs(x - x.mean())**2))
如果数组为[1、2、3、4]，则其平均值为2.5。因此，平方偏差为[2.25、0.25、0.25、2.25]，其均方根除以4，即sqrt(5/4)为1.1180339887498949。
import numpy as np
print np.std([1,2,3,4])
它将产生以下输出-
1.1180339887498949
方差是偏差平方的平均值，即mean(abs(x-x.mean())** 2) 。换句话说，标准偏差是方差的平方根。
import numpy as np
print np.var([1,2,3,4])
它将产生以下输出-
1.25